Epson R200 - Stylus Photo Color Inkjet Printer - 2.3.1 Paper Support Assy.;Housing;Stacker Assy. Removal

EPSON Stylus Photo R200/R210 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 37
2.3.1 Paper Support Assy./Housing (left/right)/Stacker
Assy. removal
o External View
Figure 2-2. paper support assy./Housing (left/right)/Stacker assy. removal
o Parts/Units which should be removed before removing paper support assy./
Housing (left/right)/Stacker assy.
Non
o Disassembly Procedure
n Paper support assy. removal
1. Release two protrusions for securing the paper support assy. to ASF frame.
n Housing (left/right) removal
1. Remove the screw ( , x1, , x1) for securing the housing (left/right).
2. Release the hook ( , x1) forward by using screwdriver.
3. Release the hook ( , x1) by inserting minus screwdriver between the housing
(lower) and the housing (left/right).
4. Release "Carriage Lock" with the tweezers or alike, then move "Carriage
unit" to the centre of the printer.
5. Remove the housing (left/right) by insert your hand to the printer mechanism.
Housing, Right Housing, Left
C.B.P3x8(4‑6kgf/cm)C.B.P3x8(4‑6kgf/cm)
Paper Support Assy.
Carriage lock lever
Backside
2 1
Bottom (right side) Bottom (left side)
3 3
Protrusion for paper
support assy.
4
4
5 5
6
6
1 2
3
4