Epson R200 - Stylus Photo Color Inkjet Printer - Page 38

EPSON Stylus Photo R200/R210 Revision A
DISASSEMBLY AND ASSEMBLY Disassembly 38
o External View
Figure 2-3. Stacker assy. removal
n Stacker assy. removal
1. Release one hook for securing the stacker assy. to housing (lower), and remove it
forward.
C A U T I O N
o When removing paper support assy./housing (left/right)/stacker
assy.;
n Do not injure your hand by the tool, such as the screwdrive.
n Do not tilt the printer too much because ink may flow if the
cap is not covered by the print head.
o When reinstalling paper support assy./housing (left/right)/
stacker assy.;
n Make sure that there is no clearance beteen the housing (left/
right) and the housing (frame).
n Make sure that the right side of the stacker assy. is set to the
damper correctly.
n Make sure that the paper support assy. is installed to the
ASF unit.
Hook
Left frontside
Stacker Assy.