1. Unpacking
2. Removing Protective Tape
3. Turning On
User's Guide
Start Here
Ink Cartridges Power Cord CD-ROM
Open Close
Remove
Remove
Remove all tape
Turn on
Connect Plug in
4. Installing Ink Cartridges
5. Installing the Software
Install Press
Close
Press
Flashing On
Close (Click)
Unpack
Wait about 1.5 min
Note:
The ink cartridges first installed in your Epson Stylus CX will be partly used to charge the print head. Subsequent ink cartridges will last for their full rated life.
OpenShake Open
Only remove the
yellow tape
If this screen appears, click Cancel.
Installation complete.
Do not connect the USB cable
until you are instructed to do so.
Insert
For Windows
For Mac OS X
❏ For Windows. No installation screen? & Double-click the CD-ROM icon.
Click
Double-click
Follow the
instructions.
When this screen appears, connect to your PC.
Follow the
instructions.
Start Here
Copyright © 2006 Seiko Epson Corporation. All rights reserved.
Printed in XXXXXX XX.XX-XX XXX
Turn over
Note:
Do not open the ink cartridge package until you are ready to install it in the printer.
The cartridge is vacuum packed to maintain its reliability.