EPSON Stylus CX3700/CX3800/CX3805/CX3810/DX3800/DX3850 Revision A
DISASSEMBLY/ASSEMBLY Printer Section 109
When installing the Waste Ink Pads, be sure to follow the steps
below.
Figure 4-17. Installing Waste Ink Pads
Step 1
Step 2
Step 3
1
2
3
4
5
6
Step 4
When installing the Waste Ink Tube to the Housing, Lower,
insert the Waste Ink Tube to both the groove of the Housing,
Lower and the Eject Ink Joint and securely fasten the Waste
Ink Tube with the Tube Clamp, or ink may leak from the Tube.
A D J U S T M E N T
R E Q U I R E D
After replacing the Waste Ink Pads, perform the following
adjustment. (Refer to Chapter 5 “ADJUSTMENT”)
“Waste Ink Pad Counter”
To Next Page
Loading...
