Epson Stylus DX3850 - Page 153

EPSON Stylus CX3700/CX3800/CX3805/CX3810/DX3800/DX3850 Revision A
MAINTENANCE Overview 153
Figure 6-10. Lubrication on EJ Frame Unit
Figure 6-11. Lubrication on Paper
Guide Front Unit(1)
Figure 6-12. Lubrication on Paper Guide Front Unit (2)
Figure 6-13. Lubrication on PF Roller Unit (1)
<Lubrication Point>
EJ Frame Unit Surface
<Lubrication Type>
KEN Grease
<Lubrication Amount>
200mg
<Remarks>
Use a injector to apply.
<Lubrication Point>
Spool Gear Shaft Surface
<Lubrication Type>
G-26
<Lubrication Amount>
φ1 x φ of Spool Gear 36
<Remarks>
Use a injector to apply.
EJ Frame Unit
Spool Gear 36
<Lubrication Type>
Contact position between the EJ
Roller and the Paper Guide Front
Unit
<Lubrication Type>
G-74
<Lubrication Amount>
φ1 x 0.04gr x 12 points
<Remarks>
Use a flux dispenser to apply.
<Lubrication Point>
1. Contact point between the PF
Groun
ding Spring and the PF
Roller Unit
2. Contact point between the Paper
Guide Front Unit and the PF
Roller Unit
1. <Lubrication Type>
2. G-26
3. G-26
<Lubrication Amount>
1. φ1 x φ of
the PF Roller Unit
(0.05Gr)
2. φ1 x φ of the PF Roller Unit
(0.05Gr)
<Remarks>
1. Use a injector to apply
2. Use a injector to apply
Paper Guide Front Unit
EJ Roller
2
1
PF Grounding Spring
PF Roller Unit