Epson Stylus Photo 1400 - Page 44

44 Printing from Start to Finish
3. Open the File menu and select Print.
4. Make sure
EPSON Stylus Photo 1400 or Stylus Photo 1400 is selected,
then click
Print Position Check Pattern.
5. Click
Print. The confirmation pattern is printed on the
CD or DVD.
6. Remove the CD or DVD and measure the distance from
the edge of the hole to the small cross marks labeled Top
and Right. You’ll need a metric ruler with millimeters for
accurate measurements.
7. Open the
File menu, select
Print, then select Position
Adjustment
. You see a screen
like this:
8. Click
Value Entry, then input
the Top distance (from your
measurement) in the Top Space
box. Enter the Right distance
(from your measurement) in the
Right Space box.
9. Click
OK to save the
measurements.
Click Print Position
Check Pattern