Need help?Do you have a question about the Epson Stylus Photo 1390 and is the answer not in the manual?
General| Print Technology | Inkjet |
|---|---|
| Maximum Print Resolution | 5760 x 1440 dpi |
| Number of Ink Colors | 6 |
| Connectivity | USB 2.0 |
| Operating System Support | Windows, Mac OS |
| Ink Cartridge Configuration | 6 individual ink cartridges |
| Media Sizes | A3+, A3, A4, Letter, Legal |
| Media Types | Photo paper, plain paper, Envelopes |
| Borderless Printing | Yes |
| Print Speed (Black) | 15 ppm |
| Print Speed (Color) | 15 ppm |
| Dimensions (W x D x H) | 615 x 314 x 223 mm |
| Weight | 11.8 kg |
Provides a general overview and main features of the EPSON Stylus Photo 1390/1400/1410 printer.
Details the printing area for various paper sizes and borderless printing.
Shows the printing area (A, B, C) for cut sheet and envelope printing.
Illustrates the printing area (A, B, C, D) for border-free printing on different media.
Shows the movable area of the printhead in relation to the printing area.
Explains the Auto Platen Gap (APG) adjuster for paper feed accuracy.
Details the printer's functions, controls, and status indicators.
Shows the printer's control panel layout with buttons and LEDs.
Describes the normal functions of the printer's panel buttons.
Details printer status and corresponding panel LED indications.
Lists error states, occurrence conditions, and remedies.
Explains the operating principles of mechanical sections and electrical circuits.
Describes the DC motors and stepping motors used as power source.
Details the components of the Carriage mechanism.
Detects carriage home position using CR Motor drive current and encoder signal.
Uses PW Sensor to control printer according to various sequences.
Mechanism for automatically adjusting platen gap using APG Motor and APG Sensors.
Details the F3-Mach head, nozzle arrangement, and color arrangement.
Mechanism that feeds paper or CD/DVD tray to the PF Roller Shaft.
Specifications of the stepping motor that drives the ASF Assy.
Transfers paper fed from ASF or CD-R from CD/DVD Tray according to print data.
Consists of Pump Unit and Cap Unit.
Keeps the Cap airtight by sticking to the Printhead surface when ink is sucked.
Sequence executed according to various timer, counter, flag and other information saved on the EEPROM.
Grasps fault location using check list based on printer LED and STM3 error indications.
Provides troubleshooting based on observed faults such as print quality troubles and abnormal noise.
Lists WARNING and CAUTION statements to be read before disassembling/reassembling.
Procedure to remove the Printhead.
Adjusts PF Motor load and ensures paper feed accuracy.
Ensures specified gap between Printhead and paper after parts replacement.
To Next Page