Epson Stylus Photo 1390 - 1.3 PG Setting

EPSON Stylus Photo 1390/1400/1410 Revision B
PRODUCT DESCRIPTION PG Setting 16
1.3 PG Setting
EPSON Stylus Photo 1390/1400/1410 features an Auto Platen Gap (APG) adjuster that sets the platen gap to suit the type of paper being used, and this prevents paper misalignment
and jamming that can cause problems during operation.
Table 1-4 shows the relationship among PG positions, media, and sensors.
Note *1: Stylus Photo 1390 does not support direct print on CD-R/DVD-R.
*2: APG sensor 1 outputs L between each PG position.
Table 1-4. PG Setting
PG Position
PG (– –) PG (–) PG (Typ) PG (+) PG (++) Release
Printing
• Some special paper • Special paper
• Plain paper
•PG (−) rubbing
prevention
• Envelope
• PG (Typ) rubbing
prevention
•CD-R*
1
---
Not printing
--- ---
• Standing-by after
power-on
(Output tray is lowered)
• At power-off
---
• Initialization at power-
on
• Cleaning (wiping)
• Replacing ink
cartridge(s)
• Waiting for CD-R to be
fed*
1
• Removing jammed
paper
PG value 1.05 mm (0.041 inch) 1.2 mm (0.047 inch) 1.7 mm (0.06 inch) 2.1 mm (0.08 inch) 4.5 mm (0.17 inch) ---
Sensor PG (– –) PG (–) PG (Typ) PG (+) PG (++) Release
APG sensor 1*
2
HHHHHH
APG sensor 2 L L L L H H