Epson Stylus Photo 1390 - 6.1.4 Lubrication

EPSON Stylus Photo 1390/1400/1410 Revision B
MAINTENANCE Overview 151
6.1.4 Lubrication
The lubrication used for the components of the printer has been decided on bases of
evaluation carried out by Epson. The specified type of grease and the amount, and
places of lubrication given in this section should be strictly observed.
Figure 6-2. Lubrication (1)
Figure 6-3. Lubrication (2)
C A U T I O N
 Never use oil or grease other than those specified in this
manual. Use of different types of oil or grease may damage the
components or affect the printer functions.
 Never apply a larger amount of oil or grease than specified in
this manual.
Table 6-1. Grease Applied to the Stylus Photo 1390/1400/1410
Type Name
EPSON CODE
Supplier
Grease G-26 1080614 EPSON
Grease G-45 1033657 EPSON
Grease G-71 1304682 EPSON
<Lubrication Point>
Left and Right Adjust Parallel Bushings
(outer circumference)
<Lubrication Type>
G-26
<Lubrication Amount>
φ1mm x 2mm
<Remarks>
• Apply with a syringe.
(Pin Head:
φ1mm)
• After lubrication, install and turn the
PG Cam Bush to spread the grease
evenly.
<Lubrication Point>
Contact points of the CR Scale Mounting
Plate (Left/Right) and the Main Frame
<Lubrication Type>
G-26
<Lubrication Amount>
Apply evenly.
<Remarks>
Apply with a brush.
Right Side Face
Adjust Parallel Bushing (Right)
Left Side Face
Adjust Parallel Bushing (Left)
Left Side Right Side