EPSON Stylus Photo 1390/1400/1410 Revision B
PRODUCT DESCRIPTION Printer Function 18
Power-on functions
Power-off function
Note : Press the power button first. Making sure the power button is not pressed down, push
and hold the ink button for 7 seconds.
CD-R printing
1.4.5 Printer Condition and Panel LED Status
Note *1: Do not apply to Stylus Photo 1390.
*2: All the LEDs turn on for 0.2 seconds.
Note : ---: No change to LED.
Blink: 0.5 seconds on, 0.5 seconds off (repeat)
Blink2: 0.2 seconds on, 0.2 seconds off, 0.2 seconds on, 0.4 seconds off (repeat)
Blink3: 0.2 seconds off, 0.2 seconds on, 0.2 seconds off, 0.4 seconds on (repeat)
Blink4: 0.8 seconds on, 0.2 seconds off
Hi-speed Blink: 0.1 seconds on, 0.1 seconds off (repeat)
Alt Blink: Continuous alternating blink of Paper and Ink LEDs.
Table 1-6. Panel Function during Power-on
Button Held during Power-on Function
Paper
Starts status printings.
Ink
Starts in rubbing reduction mode.
Table 1-7. Panel Function during Power-off
Button Held during Power-off Function
Ink Forced power-off.
C H E C K
P O I N T
Stylus Photo 1390 does not support direct print on CD-R/DVD-R.
Table 1-8. Panel Function during Printing on CD-R
Button CD/DVD Tray Function.
Paper
Inserted
• Clears CD/DVD tray error.
• Cancels the current print job during
printing.
Not inserted Clears CD/DVD tray error
Ink
Inserted Same as normal panel functions (including
the functions when the button is pushed and
held for 3 seconds).
Not inserted
Table 1-9. Panel Status
Printer Status
Button LEDs
Priority
Power Paper Ink
Power ON (Ready) condition On --- --- 12
Camera being connected
(No rubbing reduction)*
1
Blink2 --- --- 12
Camera being connected
(Rubbing reduction)*
1
Blink4 --- --- 12
Ink low --- --- Blink 11
Unsupported device
connection error*
1
--- Blink2 Blink3 10
Data processing Blink --- --- 10
Loading/Ejecting paper Blink --- --- 10
No ink cartridge or Ink end --- --- On 9
CSIC error --- --- On 9
Processing ink sequence Blink --- --- 8
Ink cartridge change mode Blink --- --- 7
CD/DVD tray error*
1
--- On --- 6
Paper out --- On --- 6
Double feed --- On --- 6
Paper (CD-R) jam*
1
--- Blink --- 5
CD-R guide error*
1
--- Blink2 Hi-speed Blink 4
Maintenance request Off Alt Blink Alt Blink 3
Fatal error Off Hi-speed Blink Hi-speed Blink 2
Powering OFF Hi-speed Blink Off Off 1
Reset request*
2
All the LEDs turn on for 0.2 seconds. ---
To Next Page
Loading...
Need help?
General
