EPSON Stylus Photo 1390/1400/1410 Revision B
PRODUCT DESCRIPTION Printing Area 15
1.2.1.1 Printing Area (CD-R)
Printing Area
Figure 1-10 shows the printing area for CD-R. Outer and inner limit of printing area is
φ120 and φ18, respectively. The process of determining the reference point and
defining the printing area is described below.
(1) The reference point in main-scanning direction is 72 mm off from the center
of the CD-R (toward the home position side). The center of the CD-R is
detected automatically.
(2) The reference point in paper-feed direction is 67.5 mm off from the center of
the CD-R (toward the downstream side).
(3) User can change the center position of the CD-R in the range of ± CDX mm
(main-scanning direction) and ± CDY mm (paper-feed direction).
Figure 1-10. Printing Area (CD-R)
C H E C K
P O I N T
Stylus Photo 1390 does not support direct print on CD-R/DVD-R.
Unit
Amount of the Nozzles Off the
Paper Edges
Adjustable Range of the CD-R
Center Position
a (Top) c (Bottom)
CDX
(X direction)
CDY
(Y direction)
inch 358/360 359/360 ±14/180 ±28/360
mm 25.26 25.33 ±2 ±2