Epson Stylus Photo 925 User Manual (English)

Other manuals for Epson Stylus Photo 925

User Guide152 pages

Manual10 pages

Service Manual167 pages

Start Here2 pages

Quick Reference16 pages

Printer Basics136 pages

Setup1 page

Setup Manual2 pages

Questions and Answers:

M
Michael HowardAug 21, 2025
Why is my Epson Printer printing blurry or smeared?
- P
  perezmiguelAug 21, 2025
  A blurry or smeared printout from your Epson printer can be caused by several factors. Ensure the printer is on a flat, stable surface. Verify your paper is dry, the printable side is up, and it's an acceptable type. If the paper curls toward the printable side, flatten it or curl it slightly in the opposite direction. Adjust the lever to the ^ position and confirm the Media Type setting in the LCD panel is correct. Remove sheets from the output tray as they print, especially transparencies. When printing on glossy media, use a support sheet or load one sheet at a time. For thick media, set the adjust lever to the ^ position. Also, try running the Head Cleaning utility.
Q
qorrAug 22, 2025
Why is my Epson Stylus Photo 925 Printer printing incorrect or missing colors?
- W
  Wendy MartinezAug 22, 2025
  Incorrect or missing colors on your Epson printer could be due to several reasons. Try running the Head Cleaning utility. If the issue continues, replace the color ink cartridge, and if needed, the black ink cartridge. Also, check the ink cartridge expiration date and replace old ink cartridges, especially if the printer hasn't been used for a while.
A
Ashley SchaeferAug 25, 2025
What to do if my Epson Printer has a paper jam?
- B
  barnettmichelleAug 25, 2025
  If your Epson printer has a paper jam, remove all paper from the feeder and reload it, then press the maintenance button. If the light continues to flash, turn off the printer and gently remove all paper. If paper remains inside after tearing, open the printer cover and remove those pieces. Turn the printer back on and try again. If the roll paper has backed out, use the roll paper knobs to rewind the paper onto the roll, and then press the Roll Paper button.
Q
qbrownAug 26, 2025
What to do if my Epson Printer displays a general error?
- K
  kstanleyAug 26, 2025
  To resolve a general error on your Epson printer, turn the printer off, wait a few seconds, and then turn it back on. If the error persists, contact your dealer.
L
Larry WilliamsAug 27, 2025
How to fix horizontal banding on my Epson Stylus Photo 925 Printer?
- P
  Paul JacksonAug 27, 2025
  To resolve horizontal banding on your Epson printer, ensure the printable side of the paper is face up in the sheet feeder. Run the Head Cleaning utility to clear any clogged ink. Verify that the Media Type selected in the LCD panel is appropriate for the media you're using. Also, check the position of the adjust lever; set it to 'm' for normal thickness media or '^' for envelopes or thick media.
D
Derek Olson Jr.Aug 29, 2025
How to fix color gaps on my Epson Stylus Photo 925?
- A
  Anthony BrownAug 29, 2025
  To address color gaps on your Epson printer, first, ensure your paper is not damaged, dirty, or too old and that the printable side is face up. Next, run the Head Cleaning utility to clear any clogged ink nozzles. Check the LCD panel for ink warnings and replace cartridges if needed. Lastly, make sure the Media Type setting in the Control Panel matches the loaded paper type.
J
Jennifer FrederickAug 31, 2025
How to fix vertical misalignment or banding on my Epson Printer?
- J
  James HenryAug 31, 2025
  To correct vertical misalignment or banding on your Epson printer, ensure the printable side of the paper is face up in the sheet feeder. Run the Head Cleaning utility to clear any clogged ink. Verify that the Media Type setting selected in the Control Panel is appropriate for the type of media loaded in the printer. Also, check the position of the adjust lever; set it to 'm' for normal thickness media or '^' for envelopes or thick media.
C
Cynthia ThompsonSep 1, 2025
What to do if my Epson Stylus Photo 925 Printer says black ink is out?
- J
  joe69Sep 2, 2025
  If your Epson printer indicates that the black ink is out, replace the black ink cartridge with a new one.
M
Margaret SimsSep 3, 2025
What to do if my Epson Stylus Photo 925 says color ink is out?
- R
  Ronnie HouseSep 3, 2025
  If your Epson printer indicates that the color ink is out, replace the color ink cartridge with a new one.
P
Patricia StuartSep 5, 2025
What to do if my Epson Stylus Photo 925 displays a cutter error?
- D
  Derrick ScottSep 5, 2025
  If your Epson printer displays a cutter error, turn the printer off, remove any jammed paper, and then turn it on again. If the error is not cleared, contact your dealer.