Epson Stylus Photo PX800FW - Page 176

Epson Artisan 800/Epson Stylus Photo PX800FW/TX800FW/Epson Artisan 700/Epson Stylus Photo PX700W/TX700W
Revision C
DISASSEMBLY/ASSEMBLY
Disassembly Procedures
https://www.manualsbooks.com
164
Confidential
3. Remove the Waste Ink Tube from the Waste Ink Cover together with the Tube
Stopper, and remove the Waste Ink Tray Assy.
Figure 4-155. Removing the Waste Ink Tray Assy (2)
Be careful about ink spilling from the Waste Ink Tube.
The Waste Ink Tray Assy includes below waste ink pads.
Location
ASP Name
Qty.
A
POROUS PAD,INK EJ,FRONT,LOWER
1
B
POROUS PAD,INK EJ,LOWER
1
C
POROUS PAD,INK EJ,LEFT
2
D
POROUS PAD,INK EJ,FRONT,2
2
E
POROUS PAD,INK EJ,BOTTOM
1
F
POROUS PAD,INK EJ,BOTTOM,2
1
G
POROUS PAD,INK EJ,FRONT,VERTICAL,1
2
H
POROUS PAD,INK EJ,FRONT,VERTICAL,2
1
I
POROUS PAD,INK EJ,FRONT,VERTICAL,3
1
J
POROUS PAD,INK EJ,VERTICAL
1
K
POROUS PAD,INK EJ,VERTICAL,2
4
L
POROUS PAD,INK EJ,VERTICAL,3
1
M
POROUS PAD,INK EJ,VERTICAL,4
1
M
L
J
C
I
B
K
D
F
E
A
H
G
Figure 4-157. Installing the Waste Ink Tray Assy
Hook
Waste Ink Cover
Waste Ink Tray Assy
Tube Stopper
Waste Ink Tube
Following the standard below, attach the Tube Stopper to the
Waste Ink Tube, and insert the tube properly to the hole of the
Waste Ink Cover. (See
Fig. 4-155, Fig. 4-156.)
Figure 4-156. Attaching the Waste Ink Tube
Waste Ink Tube
Tube Stopper
47mm