EasyManuals Logo

Epson Stylus Photo R290 Instructional Manual

Epson Stylus Photo R290
4 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
2008-8-14 13:38 PM
Instructional Manual Continuous Ink System for use in Epson Stylus Photo R290 Printer
Before using this product, please read and follow the instructions carefully.
Conduct Parts Check:
1. Accessories
a. Continuous Ink System (1) b. Air breather plugs (6) & Syringe (1) &Screwdriver (1)
c. T shape Adhesive Pad (1) & square adhesive pad (2) d. Plastic tube (1)
Fig. 1-1 Fig. 1-2 Fig.1-3
2. Set-Up Continuous Ink System (CIS)
a. Before installation, lay out all your parts in front of your printer .
b. Check your system for any leakage, and make sure your tubing system is tightly connected and straight.
c. Place the CIS ink tank on the same horizontal level as printer, The ink tank has two chambers per color, the front
chamber is to hold the ink and the rear chamber is to control the flowing pressure. It is important that the rear chamber
contains only a small amount of inks(as little as possible). The ink should reside in the front chamber. Make sure the ink
tank plugs are tightly closed, tilt the ink tank forward to make the majority of the ink flow into the front chamber if the
rear chamber has some excess ink. (Fig. 2-1 through Fig. 2-3).
d. Place the CIS on the right hand side of the printer as shown (Fig.2-4), and keep it at the same level as the printer.
e. Hold down the ink tank with one hand and unplug the original air stoppers as shown (Fig.2-5), make sure to save
these for later use.
f. Install the Air Breather wider part into the ink reservoir tank, making a snug fit (Fig.2-6).
Caution: Make sure not to push the breathers too tight as it could crack the tank. Also when removing the air breathers
from the tank use caution to avoid cracking.
Fig 2-1 Fig 2-2 Fig 2-3
Fig.2-4 Fig.2-5 Fig.2-6
3. Cartridge Installation
a. Unplug the printer power.
b. Use the screwdriver to remove the cartridge carrier cover. (Fig 3-1).
c. Then move the cartridge compartment to the left hand side of printer. (Fig. 3-2).
d. Ensuring that the colors correspond, push the cartridges all the way down in compartment just as you would do with
the original cartridges (Fig.3-3).
e. Then move the cartridge compartment to the right hand side of printer. (Fig. 3-4).

Other manuals for Epson Stylus Photo R290

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson Stylus Photo R290 and is the answer not in the manual?

Epson Stylus Photo R290 Specifications

General IconGeneral
ColorYes
Maximum resolution5760 x 1440 DPI
Print speed (black, normal quality, A4/US Letter)37 ppm
Print speed (color, normal quality, A4/US Letter)38 ppm
Total input capacity120 sheets
Envelopes sizesDL
Standard media sizesA4, Letter, Legal, 8x10\
Paper tray media typesEnvelopes, Photo paper, Plain paper
Non-ISO print media sizesLegal
ISO A-series sizes (A0...A9)A4, A5, A6
ISO C-series sizes (C0...C9)C6
Maximum ISO A-series paper sizeA4
Compatible operating systemsWin 98SE/Me/2000/XP/XP x64/Vista, Mac OS 10.2 / OS 10.5 Bundle available on CD
USB 2.0 ports quantity1
Dimensions (WxDxH)450 x 282 x 187 mm
Power requirementsAC 220 - 240V, 50 - 60 Hz
Bundled softwareEpson File Manager Epson Scan Assist Epson Attach to Email Epson Easy Photo Print Epson Print CD Epson Web-To-Page Reference Guide
Printing noise level36 dB
Power consumption (standby)0.3 W
Power consumption (printing)12 W
Market positioningHome & office
Weight and Dimensions IconWeight and Dimensions
Depth282 mm
Width450 mm
Height187 mm

Related product manuals