1-14
Setting up the Printer with Your Computer
R4C3650
Rev. C
A5 size SETUP.FM
7/18/00 Pass 3
L
Proof Sign-off:
KOW E. Yamanouchi K. Araki
M. Miyazaki
K. Ramsey
Setting up Your Printer on a Network
For Windows 95 and 98
This section tells you how to set up your printer so that other
computers on the network can use it.
First, you need to set up the printer as a shared printer on the
computer to which it is connected. Then, you must specify the
network path to the printer from each computer that will use it,
and install the printer software on those computers.
Note:
This section describes how to use your printer as a shared printer on a
network. To connect your printer directly to a network without setting
it up as a shared printer, consult your network administrator.
Setting up your printer as a shared printer
Follow these steps to share a printer connected directly to your
computer with other computers on a network.
1. Click
Start
, point to
Settings
, then click
Control Panel
.
2. Double-click
Network
.
3. Click the
File and Print Sharing
button.
To Next Page
Loading...
