2
Printing and Printer Management
2-21
R4C3650
Rev. C
A5 size MANAG.FM
7/18/00 Pass 3
R
Proof Sign-off:
KOW E. Yamanouchi K. Araki
M. Miyazaki
K. Ramsey
3. Select the type of paper you loaded in the printer from the
Paper Source list.
4. If you are using roll paper, set the Roll Paper Option as
required.
Auto Rotate (unavailable for Roll Paper (Banner))
If the length of your document is shorter than the printable
width of the roll paper, the document will automatically be
turned by 90 degrees and printed crosswise when you select
Auto Rotate
. You can save paper by using this function.
Auto Cut
Roll paper will automatically be cut after a document is
printed when you select
Auto Cut
.
Print Page Line
Page lines will be printed on the right side and below the
document for manual cutting when you select
Print Page
Line
.
Save Roll Paper (available only for Roll Paper (Banner))
Select this check box when you wish to save roll paper. The
blank portion of the last page of your document is not fed
through the printer.
5. Make settings for Orientation, Reduce or Enlarge, and
Printable Area. (The Printable Area setting is available only
for Sheet.)
6. After making your settings, click the
OK
button to close the
Page Setup dialog box.
Note:
You cannot print from the Page Setup dialog box. You can only print
from the Print dialog box.
To Next Page
Loading...
