NOTICE SHEET
About Unpacking and Assembling EPSON Stylus Pro 7800/7400
In the Unpacking and Assembling EPSON Stylus Pro 7800/7400 section of the Unpacking and Setup Guide,
step 4 on page 11 has been changed as described below.
Step 4. Remove the polystyrene foam stoppers from the sides of the printer.
About the Basket Rings
The shape of the basket rings has been changed as shown below.
Copyright © 2005 Seiko Epson Corporation. All rights reserved.
Printed in Japan 05. xx-xx
To Next Page
