6
5. Set the paper lever to the secured position. PRESS PAUSE BUTTON appears on the LCD panel.
6. Press the Pause button.
The print heads move and the sheet feeds into the printing position automatically. READY appears
on the LCD panel.
Now the printer is ready to print. While the printer is printing, do not open the front cover. If the front
cover is opened while printing is in progress, the printer stops printing, and then restarts printing when
the front cover is closed. Stopping and restarting printing may reduce the print quality.
c
Caution:
Do not leave the paper in the printer for a long period of time; its quality will deteriorate. We recommend
that you remove the paper from the printer after printing.
Loading cut sheet media with a size of A4, Letter or 8 × 10 inches
To load cut sheet media with a size of A4, Letter or 8 × 10 inches, follow the steps below.
c
Caution:
As much as possible, keep your fingers off the printable surface of the media, as fingerprints may reduce
printout quality.
1. Make sure that the printer is on and the roll paper cover is closed.
2. Press the Paper Source l button repeatedly until Sheet
appears.
3. Make sure that the paper lever is in the secured position, and then load the sheet into the paper
insertion slot until it meets resistance. Make sure that the right edge of the paper is straight and in
line with the right edge of the scale on the roll paper cover. PRESS PAUSE BUTTON appears on the
LCD panel.
To Next Page
Loading...
