8
5. Open the front cover.
6. Load the sheet into the paper insertion slot so that the bottom edge of the paper rests behind the
open front cover. Make sure that the right and bottom edges of the sheet are straight and in line with
the horizontal line and the vertical line.
7. Set the paper lever to the secured position, and then close the front cover. PRESS PAUSE BUTTON
appears on the LCD panel.
8. Press the Pause
button, and then follow the same procedure used for other cut sheet media.
c
Caution:
Do not leave the paper in the printer for a long period of time; its quality will deteriorate. We recommend
that you remove the paper from the printer after printing.
To Previous Page
Loading...
