Epson SureColor F6200 series - Page 13

SE Group Confidential (Related Staff Only) Until: Permanent
13
1. Tighten 2 long screws temporarily.
Adjust tank height
Not to
touch
Temporarily tighten
Temporarily tighten
2. Make sure the color index on the plate and Put each CSIC on each slider.
3. Set only Cyan and Black Ink Tanks into Ink Holder as the same order as the
color index.
Slider
CSIC
IMPORTANCE
Set the tank with Chip/Slider
during pushing slider.
Full side
Home side
Cyan
Black