Epson SureColor F6200 series User Manual

SE Group Confidential (Related Staff Only) Until: Permanent
4
Check ink levels
■ Ink refill
Ink level is more than 70mm:
Recommends to continue using the
printer until the ink level reaches
70mm from the bottom.
Ink level is about or less than 70mm:
Go to step 2.
1
3
4
Replace chip unit with
new one attached
new ink pack.
Refill ink.
-Use up all ink in the pack at a time.
(No remaining)
When this message appears,
check ink level of the tank
which is indicated by .
Shake the new ink pack as shown
in the illustration horizontally for
approximately 5cm left and right
for 5seconds approximately
15times.
2
Important

Epson SureColor F6200 series Specifications

General

Ink Type	UltraChrome DS Ink
Operating Systems Supported	Windows, Mac OS
Print Technology	PrecisionCore TFP Print Head
Ink Configuration	Cyan, Magenta, Yellow, High Density Black
Media Handling	Roll
Maximum Media Width	44 inches
Connectivity	USB 2.0, Ethernet
Print Speed	634 sq ft/hr (High-speed mode)