P Vent
Allows air to flow into the printer. Do not block the vent.
Needs to be cleaned once a month or when dust is noticeable.
U “Cleaning the Vent” on page 58
Q Maintenance cover
Open when cleaning the capping station or the wiper.
R Alert lamp
This lamp lights or flashes when an error occurs.
Light/Flash: An error occurred. How the lamp lights or flashes varies with the type of error. The control panel
displays a description of the error.
Off : No error.
S Control panel
U “Control panel” on page 16
T Media cover
Cover to protect the media. Except when loading or removing media, it should be closed when using the print‐
er.
SC-F6400 Series/SC-F6400H Series User's Guide
Introduction
11
To Next Page
Loading...
