C Capping station
Except during printing, these caps cover the print head nozzles to prevent them from drying out.
Needs to be cleaned at least once a month.
U “Cleaning the Capping Station and Wiper” on page 56
D Roll adapter guide
Guides for attaching media. Move the media along these guides to attach it to the adapter holder.
U “Loading Media” on page 36
E Roll lock lever
A lever that locks media in place after the roll is attached to the adapter holder.
F Adapter holder
The roll adapter is placed in this holder after the media is attached.
G Platen
This part suctions the media for printing. Needs to be cleaned at least once a month.
U “Cleaning the Platen” on page 57
H Rollers
These rollers press down on the media during printing.
I Input slot
Input slot used when printing with media.
SC-F6400 Series/SC-F6400H Series User's Guide
Introduction
13
To Next Page
Loading...
