Epson SureColor F6470H - The nozzle check pattern is not printed correctly.

o
Is the message Motor self adjustment
running. displayed on the control panel’s
screen?
The printer adjusts the internal motor. Wait for a
while without turning off the printer.
The nozzle check pattern is not
printed correctly.
o
Perform Head Cleaning.
The nozzles may be clogged. Print a nozzle check
pattern again after performing Head Cleaning.
U “Head Cleaning” on page 65
o
Has the printer been left unused for a long
time?
If the printer has not been used for a long time, the
nozzles may have dried up and have been clogged.
Steps to take when the printer has not been used for
a long time U “Notes when not using the printer”
on page 24
SC-F6400 Series/SC-F6400H Series User's Guide
Problem Solver
87