159
Maintenance and Transportation
See the instructions in these sections to maintain your printer for optimum results, or to move or
transport your printer.
Replacing the Cutter
Moving or Transporting Your Product
Replacing the Cutter
If you notice that your paper does not cut cleanly, you may need to replace the cutter. You will need a
Phillips-head screwdriver.
Caution: Do not remove the protective material from the new cutter until instructed to do so. Do not drop
the cutter or knock it against anything or you may chip the blade.
1. Press the home button, if necessary.
2. Select Settings > Maintenance > Replace Cutter > Start.
3. Open the cutter cover.
To Next Page
Loading...
