21
Installing/Replacing the Roll Paper
!CAUTION:
❏
Be sure to use roll paper that meets the specifications.
❏
Do not use thermal paper.
❏
Be careful not to insert your fingers into the paper exit. The cutter blade is installed inside the paper exit
and you might be injured.
Q
Notes:
Do not open the roll paper cover during printing or paper feeding.
Follow the procedure below to install or replace paper:
1. Make sure the printer is turned on. (U
"Turning On/Off" on page 20)
2. Open the roll paper cover by pressing the cover open button.
To Next Page
Loading...
