31
Troubleshooting
(Error) LED is flashing or lit
❏ Check whether a paper jam has occurred. Remove any jammed paper. (
U
"Removing Jammed Paper" on
page 31
)
❏ Check whether the front cover/roll paper cover is closed. Close the cover if open. (
U
"Front Side" on
page 6
)
❏ Turn off the power, wait several seconds, and then turn it on again. If the error remains, contact qualified
service personnel.
Removing Jammed Paper
When a paper jam occurs, never pull out the paper forcibly. Open the cover and remove the jammed paper.
For roll paper:
1. Open the roll paper cover.
2. Remove the paper causing the paper jam.
3. Set the roll paper again and close the cover.
To Next Page
Loading...
