Epson TM P60 Installation

7 | P a g e
Resetting the Printer to Factory Default
Before doing any configuration on the device we must first reset it back to factory defaults.
1. Press the button on the top of the printer, to the
right of the paper roll cover.
2. Press and hold the FEED button and press the
POWER button, to power on the printer.
3. When the printer has powered on press the FEED
button 6 times, then close the paper roll cover.
Note: When closing the paper cover make sure the
paper is in between the guides, so that it can be ejected
properly.
All manuals and user guides at all-guides.com

Epson TM P60 Specifications

General

Brand	Epson
Model	TM P60
Category	Printer
Language	English