1
This guide presents contents related to Bluetooth Interface unit and important information
intended to ensure safe and effective use of this product. Read this guide carefully and store
it in an accessible location.
EMC Standards Applied
Product Name: IBT I/F Circuit Board
Model Name: M315A
The following standards are applied only to the interface boards that are so labeled. (EMC is
tested using the EPSON power supplies and TM-T88V.)
Europe: CE marking
North America: EMI: FCC/CAN ICES-3 (A)/NMB-3 (A)
WARNING
You are cautioned that changes or modifications not expressly approved by Seiko Epson
Corporation could void your authority to operate the equipment.
CE Marking
DECLARATION of CONFORMITY
According to ISO/IEC Guide 22 and EN 45014
Manufacturer: SEIKO EPSON CORPORATION
Address:3-5, Owa 3-chome, Suwa-shi, Nagano-ken 392-8502 JAPAN
Representative: EPSON FRANCE S.A.
Address: Parc Technologique Europarc 60, Rue Auguste
Perret 94043 Creteil Cedex France
Declares that the Product: Product Name: Interface Board
Model Name: M315A
Commercial Name: IBT I/F Circuit Board
Conforms to the following Directives and Norms
R&TTE: Directive 1999/5/EC
EN 300 328
EN 301 489-1
EN 301 489-17
EN 60950-1
EN 62311
The printers in which this board is installed do not conform to the following:
Directive 90/384/EEC EN45501
USA
NOTICE
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference when the equipment is operated in a
commercial environment.
Copyright © 2013 by Seiko Epson Corporation
Printed in China
Bluetooth
®
Interface Model
To Next Page
