Need help?Do you have a question about the Epson TM-T88II Series and is the answer not in the manual?
General| Print Method | Thermal line printing |
|---|---|
| Resolution | 180 dpi |
| Paper Width | 80 mm |
| Interface | USB, Parallel |
| Paper Roll Diameter | 83 mm |
Identifies safety labels including hot thermal head warnings in multiple languages.
Describes a label found inside the printer cover related to opening it.
Describes a label inside the cutter section for adjustment.
Notes a caution label above the drawer kick-out connector.
Lists key topics like Printer Parts, Ordering Paper, Setup, and Troubleshooting.
Points to sections on paper ordering, printer setup, installation, and problem-solving.
Details FCC compliance for American users, including warnings.
States compliance with Canadian Interference-Causing Equipment Regulations.
States the product name as Printer and model name as M129B.
Lists directives (89/336/EEC, 90/384/EEC) and standards the printer conforms to.
Lists CE marking, EN standards, and TÜV safety standard for Europe.
Lists EMI FCC Class A and safety standards for North America.
Lists EMI VCCI Class 1 for Japan and AS/NZS 3548 for Oceania.
Outlines chapters covering printer setup, usage, reference, and troubleshooting.
Explains the meaning of warning, caution, and note symbols used in the manual.
Highlights key features like high-speed printing, low noise, and reliability.
Describes command protocols, layouts, scaling, and font options.
Covers paper loading, auto-cutter, maintenance, density, and drawer control.
Lists the EPSON power supply unit, PS-170, as an optional accessory.
Mentions affixing tapes, RS-485 interface board, and wall hanging bracket.
Specifies the thermal roll paper model NTP080-80 and lists suppliers by region.
Lists Nippon Paper Industry and New Oji Paper Mfg. as suppliers in Japan.
Lists Jujo Thermal Oy (Finland) and Kanzaki Specialty Papers (USA) as suppliers.
Details the items included in the printer box and what to do if items are missing or damaged.
Explains how to connect the computer using an appropriate interface cable.
Provides warnings and cautions for connecting a cash drawer to the printer.
Explains the process of grounding the printer using a ground wire.
Instructs on connecting the optional EPSON PS-170 power supply.
Details warnings and cautions related to connecting and using the power supply.
Details how to open the paper roll cover and remove the used paper roll core.
Shows the correct method for inserting the paper roll and its direction.
Instructs on closing the cover and tearing off the paper after installation.
Explains how to use the enclosed power switch cover to prevent accidental presses.
Describes the self-test function for checking printer operation and settings.
Details the steps to initiate and run the printer's self test.
Mentions DIP switches for changing communication settings and print density.
Explains the near-end sensor for paper and how to adjust its setting.
Explains how to control paper feeding and monitor printer status using buttons and lights.
Identifies the POWER, ERROR, PAPER OUT, and FEED buttons on the control panel.
Describes the FEED button for paper advancement.
Explains the function of the POWER, ERROR, and PAPER OUT indicator lights.
Addresses issues where control panel lights do not turn on.
Covers problems like the ERROR light being on or blinking without printing.
Explains that paper dust can affect print quality and suggests cleaning the print head.
Provides instructions and cautions for cleaning the thermal print head.
Introduces issues related to paper jams and associated cautions.
Details the steps to clear a paper jam, including opening the cover.
Describes what happens when the auto cutter is jammed.
Provides steps to correct an auto cutter jam by manual adjustment.
Lists steps to activate and use the hexadecimal dump function for software debugging.
Details printing specs: method, density, direction, width, characters per line, and spacing.
Covers printing speed, character structure, and font details.
Provides specifications for paper feeding speed and line spacing.
Details paper roll size, maximum diameter, spool diameter, and take-up width.
Provides details on supply voltage and current consumption in different modes.
Specifies operating and storage temperature and humidity ranges.
Explains the functions of DIP switches for serial interface settings.
Details the functions of the second set of DIP switches for various settings.
Shows how to select print density using DIP switches 2-3 and 2-4.
Provides important notes regarding DIP switch changes and their effect.
Shows print density selection using SW 2-3 and SW 2-4 for parallel interface.
Details notes on DIP switch settings, reset behavior, and speed limitations.
Provides step-by-step instructions on how to change the DIP switch settings.
Explains how the paper near end detector works and how to adjust its settings.
Lists EPSON sales subsidiaries in North America and Europe with contact information.
Lists EPSON sales subsidiaries in Asia with contact information.
To Next Page
