4-2 Reference Information
Notes:
Printing speed may be slower, depending on the data transmission
speed and the combination of control commands.
There may be variations in printing after switching the mode of the
printing speed. To prevent this for logo printing, using a
downloaded bit image is recommended. (Change in printing speed
does not occur during downloaded bit image printing).
Paper feeding speed: Approximately 120 mm/second
(approximately 4.72”/second) continuous
paper feeding
Line spacing (default): 4.23 mm (1/6”)
Programmable by control command.
Number of characters: Alphanumeric characters: 95
International characters: 32
Extended graphics: 128
×
7 pages
(including one space page)
kanji chareacters: JIS-Level 1, Level 2
(JIS X0208-1990)
Character structure: Font A: 12
×
24 (including 2-dot spacing
in horizontal)
Font B: 9
×
17 (including 2-dot spacing in
horizontal)
Kanji: 24
× 24
Font A is the default
To Next Page
Loading...
Need help?
General
