191
Note: The scanner unit cannot be opened from the position shown below. Close it completely before
operating your product or opening the scanner unit again.
8. Close all parts on the product as shown.
9. Place the product in its original packing materials, if possible, or use equivalent materials with
cushioning around the product.
Keep the product level during transportation. Be sure to remove the tape from the ink cartridge holder
before turning on your product. If print quality has declined when you print again, clean and align the
print head.
Parent topic: Cleaning and Transporting Your Product
Related concepts
Print Head Cleaning
Print Head Nozzle Check
To Next Page
Loading...
