Using the CD
1
Make sure the printer is NOT CONNECTED to
your computer.
Windows
®
: If you see a Found New Hardware screen,
click Cancel and disconnect the USB cable.
2
Insert the product CD and follow the instructions
on the screen to run the setup program.
Mac OS X: Make sure you install Software Updater;
internet connection required.
3
When you see the Select Your Connection screen, select one of the following:
•
Wireless connection
If you’re using Mac OS X 10.6, 10.7, or 10.8, you will need to use the
buttons on the printer to select wireless settings.
Make sure you know your network name (SSID) and network password.
•
Direct USB connection
Make sure you have a USB cable (not included).
•
Wired network connection (XP-810)
Make sure you have an Ethernet cable (not included).
Any problems?
Network setup was unsuccessful.
• Make
sure
you
select
the
right
network
name
(SSID).
•
If
you
see
a
firewall
alert
message,
click
Unblock
or
Allow
to
let
setup
continue.
•
If
your
network
has
security
enabled,
make
sure
you
enter
your
network
password
(WEP
key
or
WPA
passphrase)
correctly.
Password
must
be
entered
in
the
correct
case.
You see error messages on the printer’s screen.
See
the
online
User’s Guide
for
troubleshooting
information.
Start Here
are the same for the XP-610.
o
1
2
6
4
Unpack
Turn on and configure
Install software
3
Install ink cartridges
Load paper
*412524300*
*412524300*
Setup is unable to find my printer after connecting it with a USB cable.
Make sure it is securely connected as shown:
Any questions?
Quick Guide
Basic information and troubleshooting.
User’s Guide
Click the icon on your desktop (or in the Applications/Epson Software/Guide folder
in Mac OS X) to access the online User’s Guide.
Need paper and ink?
XP-610/XP-810 replacement ink cartridges
Color Standard-capacity High-capacity
Photo Black 273 273XL
Black 273 273XL
Cyan 273 273XL
Magenta 273 273XL
Yellow 273 273XL
Select
Note:
panel.
Caution: Do not connect to your computer yet.
2
1
XP-610/XP-810 Small-in-One
®
5
Connect the fax line (XP-810)
Connect the phone cord to a telephone wall
jack and to the LINE port on your product.
See the online User’s Guide for more
information.
not
Shake the BK (black)
cartridge only.
Note: Store the caps in the included
plastic bag. Use them to recap the
ink cartridges after removing them
for storage or disposal.
1
2