-18-
CONTROLS
1) Light switch
2) Electronic control
3) Internal motor fan microswitch
(with door open: internal motor fan disconnetted)
TEMPERATURE SETTING AND CONTROLS
Each refrigerating appliance is provided with an electronic control for automatic maintenance of the
temperature inside the tank. This temperature adjuster is gauged by the factory and should not be touched
by the user. Only if the average internal temperature is too cold or not cold you can proceed as follows:
- press for two times the (Set) key in order to see on display the temperature set point.
- press the ( ) key or the ( ) key in order to increment or decrement the temperature set point
- press the (Set ) key in order to store the new temperature set point.
Defrosting is automatic on display tank
If you want to set a manual defrosting, just defrost the unit manually by pushing for at least 5 sec. the
( ) key of electronic control.
EIS 65 EIS 115
EIS 165
EIS 215
1
2
3
3
3
3
3
To Next Page
Loading...
