EQ3 3020-537-8 User Manual

Components Identification
Identification de la quincaillerie
1. Read through the instructions carefully before starting assembly.
2. Check the contents of the package. Contact the point of sale if you
find anything defective or missing.
3. Make sure that the indicated tools are available.
4. Assemble step by step as shown in the instructions.
5. It is a good idea to use a soft, protective underlay during asse
mbly.
6. Do not use power tools at any stage of the assembly.
7. This product must be assembled by an adult.
Before Assembly
Assembly Instructions
Instructions de montage
/ 26140
1/5
Hardware Identification
Identification de la quincaillerie
A x 12 B x 12
C x 12 D x 2
E x 1
F x 4
1
2 3
4
5
6
3020-537-8
R
Avant le montage

EQ3 3020-537-8 Specifications

General

Brand	EQ3
Model	3020-537-8
Category	Indoor Furnishing
Language	English

Summary

Assembly Preparation

Before Assembly Instructions

Review all instructions, check parts, confirm tools, and prepare the assembly area before starting.

Identification of Parts

Hardware Identification

Lists and identifies all hardware components required for assembly, including screws, washers, and tools.

Main Components Identification

Identifies the main structural components of the desk, numbered 1 through 6 for assembly reference.

Assembly Steps

Step 1: Initial Setup

Position the main desk structure and prepare for leg attachment, ensuring correct orientation.

Step 2: Attaching Legs

Attach the first set of legs (components 2, 3, 4, 5) to the main desk structure using hardware.

Step 3: Securing Legs

Continue attaching and securing the remaining legs (components 2, 3) to the desk structure.

Step 4: Adding Support

Install the support bar (component 6) using the specified hardware (screw D).

Step 5: Final Orientation

Flip the desk upright, transitioning from the assembly stage to the final product orientation.

Step 6: Final Tightening

Perform final checks and tighten all screws (A, B, C) for structural integrity.

Important Advice and Warnings

Post-Assembly Checks

Re-tighten screws and bolts after a few weeks to maintain stability.

Cleaning Guidelines

Use mild soapy water and a soft cloth for cleaning; avoid harsh agents.

Safety Precautions

Adhere to weight limits, avoid improper use, and do not let children climb on the desk.