EQUATION DH1001 - Product Usage and Maintenance; Operation; Emptying the Tank; Cleaning

45
EN
USE
• Place the switch in position "1" to start the appliance. The light comes on.
• Place the switch in the "0" position to turn o the device. The light comes o.
EMPTYING
• When the tank is full, the device stops automatically thanks to the floating ball.
• Place the switch in the "0" position to turn o the device. The light comes o.
• Take out the tank and remove the lid to empty the water
• Replace the tank with its lid
• Place the switch in position "1" to start the appliance. The light comes on.
CLEANING
• Use a soft, dry cloth.
• For persistent stains, use a cloth dampened with soapy water and wipe immediately with a dry cloth.
TROUBLESHOOTING
Malfunctions are often due to minor causes; please read the table below before contacting the after-sales service.
This can save you time and avoid unnecessary expenses.
Problem Causes, Solutions
The device does not turn on.
Check that the device is powered correctly. Check that the switch is not in position 0. Check that the tank
is not full.
The device makes an
abnormal sound.
Check that no foreign body has been accidentally inserted.
ON/OFF switch
Power plug
Tank
Tank lid
Floating ball