EQUATION SC-3G40A - Handling Method

Notes If the humidifier does not work properly after the following treatments,
please contact the customer service center or local service station.
Fault phenomenon
The humidier does not
work
The power plug is not plugged
well
The power plus is plugged well
The water is added to the tankThere is no water in the water
tank
The water tank is not in place
The water is dirty or storage
duration is too long
Possible causes Handling method
7.Service guide
The water tank must be put in
place and fastened
The mist from the
humidier smells bad
The humidifying eect
is not ideal
Rotate the mist vent to the
maximum
The mist vent is clogged
There is water leakage
after lling
Please remove the foam used
to x the oat ball in
accordance with 1 hereof
The foam used to x the oat
ball has not been taken out
There is abnormal
noise
Put the humidier on a solid
surface or a at place
The humidier is tilted or
unstable or is not placed securely
The water shortage
warning remains in
eect, although water
is available in the
water tank
Wait for 1min before starting
the humidier
The water in the water tank is
owing to the sink, and it has
not reached the normal
working level
While water is available
in the water tank, the
water shortage warning
remains in eect, and
the humidier doesn't
work for a long time
Put the humidier on a at
and solid place to, and kept it
steady
Excessive tilting of the humidier
at an angle results in the water
level in the sink being thought
too low, so the humidier has
stopped working due to
automatic protection
Replace clean water or clean
the water tank and sink
57
FR
ES
PT
IT
EL
PL
RO
EN