8
Turn the Inner Plastic Filter counter-clockwise and remove it along
with the Outer Mesh Filter.
Discard any food and debris that may have collected and rinse
with water.
Lift out the Flat Metal Base and rinse with water.
Replace all these parts securely.
·
·
·
·
Clean the Spray Arms regularly.
Lower Spray Arm:
Remove the Lower Spray Arm by simply lifting it up.
Rinse under water to ensure smooth flow/spray from the holes.
Replace the Spray Arm, ensuring that it snaps back in place firmly.
·
·
·
Upper Spray Arm:
Turn the nut at the connecting point of the Spray Arm to release it.
Slide the Spray Arm off and rinse under water to ensure smooth
flow/spray from the holes.
Replace the Spray Arm, ensuring that it clicks into place and the
nut is tightened.
·
·
·
Clean the filter at the base of the dishwasher regularly:
Inner Plastic Filter
Outer Mesh Filter
Flat Metal Base
Lower Spray Arm Upper Spray Arm
To Next Page
Loading...
