Equator PLS600V - User Manual

Questions and Answers

E
Elizabeth ChavezJul 31, 2025
How to fix Equator Dishwasher that does not get water?
- T
  Tyler MurphyJul 31, 2025
  If your Equator Dishwasher isn't getting water, first check the water supply network. Also, ensure the water pressure is at least 2 bar. Inspect the water supply hose for any bends and straighten it if necessary. Finally, the filter of the water supply hose might be clogged. Clean the filter by removing the back cover (for SUPER AUTOMATIC models) or accessing the hose externally (for PLS-Series models), then running a wash cycle without dishes or detergent to check for proper water flow and to ensure there are no leaks.
S
Sarah WilsonAug 7, 2025
Why Equator Dishwasher has no power?
- H
  hendersonmarcAug 7, 2025
  If your Equator Dishwasher is inactive, check the electrical socket to ensure it's providing power. If the socket is out of order, you will need to call an electrician.
S
Sarah RiceAug 14, 2025
How to fix Equator Dishwasher that does not drain the water?
- G
  Gary PowellAug 14, 2025
  If your Equator Dishwasher isn't draining water, check the draining hose for any bends and stretch it out. If there's water in the tub, remove it with a sponge. Then, restart the appliance without dishes or detergent to see if it drains properly.
L
laurahubbardAug 21, 2025
What to do if heating element indicator lights off and on during Equator Dishwasher program?
- C
  Charles StewartAug 21, 2025
  If the heating element indicator light in your Equator Dishwasher turns off and on during the program, open the door, turn the timer switch to the start point, and restart the program. If the problem continues, further assistance may be needed. Also, if water drains suddenly when the indicator light turns off, further assistance may be needed.