Equator PLS600V - Appliance Operates With Door Open; Appliance Restarts After Program End; Crevice on Heating Element; Water Temperature Gets Too High

EQUATOR ADVANCED Appliances
Service Manual : COMPACT DISHWASHER – PLS 600 / 602 SERIES
Page 8
15. THE APPLIANCE DOES NOT STOP TO OPERATE WHEN THE DOOR IS
OPEN :-
a. REPAIR requirement Possible malfunction:
a. Faulty door micro-switch
b. Damaged spring on the door micro-switch rod
c. Calcars on the fitting point of door micro-switch
rod
16. THE APPLIANCE STARTS AGAIN WHEN THE PROGRAM HAS BEEN
TERMINATED :-
a. REPAIR requirement Possible malfunction:
a. Faulty timer – switch.
17. CREVICE ON THE SURFACE OF THE HEATING ELEMENT :-
a. REPAIR requirement Possible malfunction:
a. Damaged heating element.
18. THE WATER TEMPERATURE GETS VERY HIGH :-
a. REPAIR requirement Possible malfunction:
a. Faulty temperature thermostat.
19. THE SALT INDICATOR LIGHTS ON WHILE THE SALT CONTAINER IS
FILLED UP :-
a. REPAIR requirement Possible malfunction:
a. Faulty water softener device
20. THE APPLIANCE SPENDS THE SALT OF THE SALT CONTAINER ,
UNUSUALLY FAST :-
a. REPAIR requirement Possible malfunction:
a. Faulty water softener device
21. THERE IS NO POWER , THE APPLIANCE IS INACTIVE :-
a. There is not electrical supply from the
socket.
Check the socket. If it is out of order, call an
electrician.