To Next PageTo Next Page
Need help?Do you have a question about the Equinox Systems EQ-DS8B-IRRB and is the answer not in the manual?
General| Brand | Equinox Systems |
|---|---|
| Model | EQ-DS8B-IRRB |
| Category | Touch Panel |
| Language | English |
Describes the instrument's measurement capabilities and applications.
Troubleshooting steps for when the instrument shows no display.
Checks for incorrect readings and input signal conformity.
Troubleshooting for control issues and output circuit damage.
Interpreting and resolving over/under-range input signals.
Visual guide for connecting various input/output signals and power.
Details available input signal types, their ranges, and specifications.
Explains how to select options for ordering the EQ-DS8B series.
Lists key technical specifications like power, consumption, accuracy, and sampling rate.
Provides physical dimensions and mounting information for the instrument.
Steps to select and configure input signal types and ranges.
Configuration for low/high display limits and decimal points.
Configuration for alarm hysteresis for AL1, AL2, and AL3.
Procedure for clearing the sensor's zero point.
Describes dual input calculation for watt meter use.
Describes the initial power-on sequence and LED indicators.
Guide to selecting the appropriate input signal type.
Explanation of how PV and Rate values are displayed.
Setting the range, mode, and hysteresis for Alarm 1.
Setting the range, mode, and hysteresis for Alarm 2.
Setting the range, mode, and hysteresis for Alarm 3.
Adjusting the offset value for display calibration.
Explains how to lock or unlock parameters for modification.
