Need help?Do you have a question about the Erbauer EJS18-Li and is the answer not in the manual?
General| Type | Jigsaw |
|---|---|
| Power Source | Battery |
| Voltage | 18V |
| Battery Type | Li-Ion |
| Stroke Length | 25mm |
| Bevel Angle/Capacity | 45° |
| Max. Cut in Wood | 80mm |
| Max. Cut in Aluminium | 20mm |
| Variable Speed | Yes |
| Orbital Action | Yes |
| No Load Speed | 3000 SPM |
| No Load Speed (RPM) | 3000 |
Lists and labels all parts of the jig saw, with numbered references.
Visual representations of the product and its assembly steps.
Essential safety advice for all power tools, including warnings and references.
Guidelines for maintaining a safe and clean working environment.
Precautions related to electrical connections and conditions.
Guidelines for professional tool repair and maintenance.
Safety precautions specific to operating a jig saw.
Warnings and instructions for battery handling, use, and storage.
Information on risks associated with breathing construction dust.
A numbered list detailing all parts of the jig saw.
Detailed technical data for the jig saw, including voltage and speed.
Measured vibration and noise emission values for the tool.
Breakdown of the model number nomenclature and its components.
Explanation of icons and symbols used throughout the manual.
Procedures for checking contents and preparing the tool.
How to charge the battery and check its status using the power bar.
Guide to correctly fitting and removing saw blades.
Attaching accessories for cutting and dust management.
Specifies the product's designed applications for cutting materials.
How to adjust the pendulum action for different types of cuts.
Procedures for setting bevel angles for angled cuts.
Operating the power switch and variable speed control.
Features for illumination and dust management during operation.
Using the parallel guide for making straight, parallel cuts.
Technique for starting cuts within a workpiece surface.
Method for making internal cuts without an edge lead-in.
How to perform angled cuts using the adjustable base plate.
Steps for keeping the tool in good working order and clean.
Guidelines for safe storage and moving the tool.
Details of the 2-year trade guarantee against manufacturing defects.
To Next Page
