Need help?Do you have a question about the Erbauer EMT300-QC and is the answer not in the manual?
General| Blade Diameter | 210 mm |
|---|---|
| Power Source | Corded Electric |
| No Load Speed | 5000 rpm |
| Bevel Capacity | 45° |
| Dust Extraction Facility | Yes |
| Cutting Depth at 45° | 45 mm |
Lists all components and their corresponding numbers as shown in diagrams.
Defines the meaning of various symbols found on the product and in the manual.
Covers work area, electrical, and personal safety precautions for safe operation.
Details safety precautions for sanding and construction dust hazards.
Information on vibration risks, noise reduction, and residual risks.
Steps for safely unpacking the product and checking contents.
Overview of accessories and instructions for attaching them to the tool.
Information on choosing and using correct grit sanding papers for tasks.
Outlines the tool's purpose and essential pre-operation safety checks.
Explains the tool's controls, speed dial, and operational modes.
Details on how to perform cutting and scraping tasks with the tool.
Procedures for cleaning the tool and checking for wear or damage.
Details on power cord, UK plug, and safe storage guidelines.
Statement confirming the product meets relevant EU and UK regulations.
To Next Page
