What to do if my Erbauer ERB337TCB Cutter motor is not running?
If the motor of your Erbauer Cutter isn't running, the issue might be due to the absence of main voltage. First, check the cable and plug socket. Then, inspect the fuse to ensure it's working correctly.
Why is the cutting disc on my Erbauer Cutter discolored?
A discolored cutting disc on your Erbauer Cutter can be due to insufficient cooling water. Ensure you fill the product with water. It can also happen because of lateral friction caused by cut runout. Try guiding the workpiece through the cutting disc more slowly.
What to do if the motor runs, but the Erbauer ERB337TCB disc remains still under load?
If the motor of your Erbauer Cutter is running but the cutting disc remains still when subject to a load, it could be due to a loose flange nut. Check that the flange is seated correctly and tighten it if necessary.
To Next Page
General
