18V CHARGER ERB607CHR
such as metallic particles should be kept away from
charger cavities. Always unplug the charger from the
power supply when there is no battery pack in the
charger or before attempting to clean.
PROBLEM SOLUTION
I CANNOT FIT THE BATTERY INTO THE
BATTERY CHARGER. WHY?
a) Check if the charger and the battery pack are
specically designed for working together.
b) The battery can be inserted into the charger only
in one direction. Turn the battery around until it can
be inserted into the slot, the indicator light should
be green and ash when the battery is charging.
REASONS FOR DIFFERENT CHARGING TIMES
The charging time can be affected by many
reasons which are not defects in your product.
a) If the battery pack is only partly discharged it
may be re-charged in less than rated charging
time.
b) If the battery pack and ambient temperature
are very cold/ hot, it may take longer to re-charge.
Please nd an appropriate environment with proper
air temperature to start charging.
c) If the battery pack is very hot, remove battery
pack from the charger and allow battery pack
to cool rst to ambient temperature and then
recharging can be started.
MAINTENANCE
Remove the plug from the socket before
carrying out any adjustment, servicing or
maintenance.
Your battery charger requires no additional
lubrication or maintenance. Never use water or
chemical cleaners to clean your charger. Wipe
clean with a dry cloth. Always store your charger in
a dry place.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service agent
or similarly qualied persons in order to avoid
a hazard
To Next Page
Loading...