EN
18
Cutting hazard, even with the cutting tool at standstill!
• Wear gloves when changing cutting tools.
• Store saw blade in such manner that nobody will get hurt.
Danger from workpiece kickback!
• Always work with a properly set riving knife.
• Do not jam any work pieces.
• Make sure the saw blade is suitable for the workpiece material.
• Cut thin or thin-walled workpieces only with finetoothed saw blades.
• Always use sharp saw blades.
• If in doubt, check work piece for inclusion of foreign matter (e.g. nails or
screws).
• Cut only stock of dimensions that can be safely held during cutting.
Entangelement hazard!
• Ensure that no parts of the body or clothing can be caught and drawn in
by rotating components (no neckties, no gloves, no loose-fitting clothes;
contain long hair with hairnet).
• Never attempt to cut any workpieces which contain
• ropes,
• strings,
• cords,
• cables or
• wires, or to which any of the above are attached.
Hazard generated by insufficient personal protection gear!
• Wear hearing protection.
• Wear safety glasses.
• Wear dust mask.
• Wear suitable work clothes.
• When working outdoors wearing of non-slip shoes is recommended.
To Next Page
Loading...
