17
IMPORTANT!
Please read all information carefully.
These instructions for use do not replace the user manual of the
electrosurgical unit (ESU) used! Read the user manual of the
electrosurgical unit and ask Erbe or your distributor in case of
doubt!
1 Intended Use
The adapter bipolar resection is used to connect bipolar resecto-
scopes to a VIO 300 D with MF socket. It allows the use of the
BIPOLAR CUT ++ and BIPOLAR SOFT COAG ++ modes.
The adapter can be used in ESU Model VIO 300 D, Software Ver-
sion V 1.8.x and Software Versions V 2.2.x or Higher.
2 Safety instructions
This product may only be used by medical personnel who have
been trained per these instructions.
Before each use, check that the product is intact. Verify that
there are no signs of physical damage.
If damaged, do not use this product!
Do not use in the presence of combustible or explosive materi-
als!
Protect this product from any form of mechanical damage! Do
not throw! Do not use force! If there is a cable, and unless stated
otherwise, do not kink it or wrap it around the accompanying
product!
OBJ_DOKU-189061-004.fm Seite 17 Mittwoch, 24. August 2016 4:48 16
To Next Page
Loading...