EasyManua.ls Logo

ergoline EVOLUTION 600 - Maintenance Procedures; Cleaning Procedures

ergoline EVOLUTION 600
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
40
Cleaning
Please read and observe ...
Cleaning
Antifect
®
fast disinfectant cleaner
Antifect concentrate, 250 ml Order No.: 8001813
Spray bottle, 1 ltr. (empty) Order No.: 8001513
Spray head Order No.: 8001613
Mixing container, 5 ltr. (empty) Order No.: 8001713
: JK-Licht GmbH – see page 2.
Acrylic glass surfaces
Filter panels and lamps
Risk of infections!
Infections can be spread by skin contact.
All articles/device components, which can come into contact
with the user during tanning, must be disinfected after every tan-
ning:
Protective goggles
Pillows
Acrylic sunbed
Handles and control panel
Note:
Follow the manufacturer's instructions for use.
Caution!
Do not rub with a dry cloth – danger of scratching!
For fast, hygienic proper cleaning of acrylic glass surfaces, use
exclusively the specially developed fast disinfectant cleaner
Antifect
®
.
Other cleaning agents, especially concentrated disinfectants or
solvents (e.g. Lysoform, ethyl alcohol or other liquids containing
alcohol), may not be used for cleaning.
Failure to observe this voids all guarantee claims.
UV high-pressure lamps: Clean bulb with spirit if necessary.
UV low-pressure lamps: Clean with plain water (damp cloth).
Filter panels: Clean with plain water (damp cloth).

Table of Contents

Related product manuals