Ergotron Dual Monitor and Handle Kit User Manual

888-97-314-G-03 rev. F • 03/17
6 of 6
8
Adjustment · Ajuste · Réglage · Einstellung · Instellen · Regolazione · 調整 · · 조절
© 2013 Ergotron, Inc. All rights reserved.
EN
Important! Adjust your mounting solution to handle the added weight.
You will need to adjust your product after installation is complete. Make sure all your equipment is properly
installed on the product before attempting adjustments. Your mounting solution should move smoothly and
easily through the full range of motion and stay where you set it. If movements are too easy or dicult or if
product does not stay in desired positions, follow the adjustment instructions that came with your mounting
solution to create smooth and easy movements. Depending on your product and the adjustment, it may take
many turns to notice a dierence. Any time equipment is added or removed from your moutning solution,
resulting in a change in the weight of the mounted load, you should repeat the adjustment steps to ensure safe
and optimum operation.
For local customer care phone numbers visit: http://contact.ergotron.com
For Service visit: www.ergotron.com
For Warranty visit: www.ergotron.com/warranty
Learn more about ergonomic computer use at:
www.computingcomfort.org
Set Your Workstation to Work For YOU!
Height Position top of screen slightly below eye level.
  Positionkeyboardataboutelbowheightwithwristsat.
Distance Position screen an arm's length from face—at least 20” (508mm).
Position keyboard close enough to create a 90˚ angle in elbow.
Angle Tilt screen to eliminate glare.
  Tiltthekeyboardback10°sothatyourwristsremainat.
To Reduce Fatigue
Breathe - Breathe deeply through your nose.
Blink - Blink often to avoid dry eyes.
Break • 2 to 3 minutes every 20 minutes
• 15 to 20 minutes every 2 hours.

Ergotron Dual Monitor and Handle Kit Specifications

General

Brand	Ergotron
Model	Dual Monitor and Handle Kit
Category	Monitor
Language	English