Ergotron Dual Monitor and Handle Kit User Manual

888-97-314-G-03 rev. F • 03/17
1 of 6
6 - 18 lbs
(2.7-8.2 kg)
6 - 18 lbs
(2.7-8.2 kg)
A
B
A
+B=
9- 36 lbs (4.1-16.3 kg)
ASSEMBLY INSTRUCTIONS
Instrucciones de instalación
Notice d’assemblage
Montageanleitungen
Installatie instructies
Manuali d’Istruzione
取扱い説明書
安装说明
설치 안내
Dual Monitor and Handle Kit
A B C D E F
1
2
3
4
M4 x 7mm
14x
2x
2x
2x
1x
M6 x 30mm
2x
M3.5 x 6mm
M3 x 6mm
1x
1x
2x
M4 x 10mm
2x
1x
ID: 6.5 mm
OD: 12 mm
THK: 1 mm
2x
3x
14"-24.5"
(356-622 mm)
14"-24.5"
(356-622 mm)
4x
M6 x 8mm
1x
4 mm
4x
M4 x 11mm
M4 x 8mm
2x
User's Guide - English
Guía del usuario - Español
Manuel de l’utilisateur - Français
Gebruikersgids - Deutsch
Benutzerhandbuch - Nederlands
Guida per l’utente - Italiano
Användarhandbok - svenska
ユ ー ザ ー ガ イド : 日本語
用户指南 : 汉语
EN
IMPORTANT! This product adds an additional 6 lbs. (2.7 kg) to your mounting solution. Your mounting solution's
monitor weight capacity must be reduced by 6 lbs. (2.7 kg) when using standard monitors less than or equal to 2.5"
(64 mm) thick. Additional reduction will be required if monitors are greater than 2.5" (64 mm) thick.
For the latest User Installation Guide please visit: www.ergotron.com

Ergotron Dual Monitor and Handle Kit Specifications

General

Color	Black
Weight Capacity	Up to 20 lbs per monitor
Mounting Interface	VESA 75x75mm or 100x100mm
Adjustability	tilt, rotation
Mounting Type	Desk mount
Cable Management	Yes
Material	Aluminum and steel

Summary

Assembly Instructions Overview

Important Weight Capacity Considerations

Product adds 6 lbs. to mounting solution; reduce monitor capacity by 6 lbs. for monitors <= 2.5" thick.

Mounting Solution Attachment

Option A: 100 x 100 mm Hole Pattern

Attach product to mounting solution with 100 x 100 mm mounting hole pattern.

Option B: 50 x 50 mm Hole Pattern

Attach product to mounting solution with 50 x 50 mm mounting hole pattern.

Install Portrait/Landscape Stop Screw

Main Arm and Handle Assembly

Attach Arms to Main Bracket

Securely attach the dual monitor arms to the main bracket using provided hardware.

Monitor Bracket Attachment and Adjustment

Attach Monitor Brackets to Arms

Fasten monitor brackets to the main arms using M4 x 7mm and M4 x 8mm screws.

Center Equipment Width on Stand

Ensure the total width of mounted equipment is centered on the stand.

Final Assembly Steps

Secure Cable Management

Route and secure cables using the provided clips for tidy management.

Attach Handles

Install the handles onto the monitor arms for easier adjustment.

Final Adjustment and Ergonomics

Adjust Mounting Solution for Weight

Adjust the mounting solution to ensure smooth and stable movement of the added weight.

Optimizing Workstation Ergonomics

Tips for setting screen height, distance, angle, and keyboard position for comfort.